ZEDsatellite

Precise measuring directly at the test object

The ZEDsatellite decentralized measuring and testing modules enable measuring directly at the test object, increasing measuring accuracy and reliability.

The data from the available measuring methods can be easily read out centrally via ZEDbox or any other unit from the ZED device family.

Measuring methods

RD	RD relative pressure (optional: 2-channel)
RD / GP	relative pressure with bell testing
RD / DF	relative pressure with flow rate
DD	differential pressure
MF	mass flow

(See technical data for available pressure ranges)

Accessories (optional)

Test leak
Leak calibrator
External ventilation valve
Temperature compensation

ZEDsatellite application examples

Automotive: Engines, cylinder heads, gears, diaphragms, auxiliary heaters, power adapters, hybrid drives, heat exchangers, control electronics, batteries, lines, valves, fuel cells, pumps, etc.
Medical technology: Catheters, dialysis filters/boxes, flushing/hose systems, secretion containers, syringes, external lung machines, etc.

Packaging/cosmetics: Dispensing pumps, plastic bottles, cartridges, etc.
Household appliances: Water distributors, water pumps, gas valves/fittings, stoves, compressors, etc.
General industry: Cylinders, safety/non-return valves, couplings, grippers, ball valves, seals, throttle pins, etc.

Control unit

Expansion and combination options
ZEDbox	1 external + 1 external	max. 2 channels
ZEDbase+	1 internal + 1 external	max. 2 channels
ZEDmod	internal external	max. 8 channels

Interfaces

Auxiliary
Temperature sensor
Interface to the control unit

Dimensions (H x W x D): 139 x 235 x 315 mm
Weight: approx. 8 – 10 kg
Power supply: 24 VDC (+10 / -5%) 5 A
Test medium: Compressed air (oil and water-free according to ISO 8573-1 class 3)

Technical data:	Relative pressure	Differential pressure	Accumulation pressure	Mass flow	Flow rate
Test pressure range	Vacuum – 232 psi / 16 bar		0 – 6 bar	Vacuum – 116 psi / 6 bar
Test pressure accuracy	1% of the end value	1% of the end value	1% of the end value	1% of the end value
Measuring range	As with test pressure range	– 1.45 – 1.45 psi – 100 – 100 mbar	10,000 – 450,000 ccm/min \| ml/min	-50 – 50 or -250 – 250 ccm/min \| ml/min	up to 250,000 ccm/min \| ml/min
Measurement resolution	0.5 ppm of the end value
Smallest measurable pressure change (type-specific)	0.5 Pa (14.50 psi / 1 bar) – 4 Pa (232 psi / 16 bar)	0.1 Pa	0.1 Pa (50 mbar) – 1.5 Pa (6 bar)
Measuring accuracy (leak rate)	Depending on the test setup		Depending on the test setup	Typically 5% of the measured value, no smaller than 0.5% of the end value
Repeatability	Depending on the test setup		Depending on the test setup	0.5% of the measured value, no smaller than 0.05% of the end value (depending on the test setup)